Water quality protectant

 

M1 protective agent is designed and manufactured for water quality in China. Its high-performance M1 protective agent can effectively protect metal corrosion and remove system scale. M1 protective agent was tested by ingel testing center

 

 

 

Prevent metal corrosion, prevent black mud

 

Inhibit microbial growth

 

Prevent fouling of heat exchanger

 

Reduce boiler (heat pump) component fault, improve boiler (heat pump) efficiency

 

Reduce environmental impact

 

Reduce radiator failure and improve radiator efficiency

 

 

 

Product usage:

 

Used for heating system, to prevent metal corrosion and scale on boiler (heat pump) equipment. Restrain metal corrosion in heating system equipment. Compatible with plastic pipe and rubber.

 

 

 

Usage:

 

The recommended concentration of protective agent M1 is 0.5%. A 500ml bottle of protective agent can handle a 100-square-meter heating system (100-liter water system). For open system, protective agent is added through water replenishment and expansion tank. For sealing systems, use a syringe to add through the radiator vent or the distributor drain valve.

 

Note: protectants are not applicable to domestic hot water systems. For the protection of the system to remain effective, the concentration of M1 should be regularly tested (once a year). For untreated or fouling systems, it is recommended to thoroughly clean with cleaner M3 before using protective agent Ml as the original organic residue can damage the equipment.

 

Packaging, processing and storage:

 

M1 is packaged in a 500ml plastic container. Protective agent Ml is classified as non-hazardous, but as with all chemicals, keep out of reach of children. Do not mix with other chemicals. Do not take. In case of contact with eyes or skin, rinse immediately with plenty of water. It is recommended that M1 protective agent be stored above zero.

 

Make the system cleaner!

No harm of protective agent

Formation of corrosion:

 

Presence of oxygen - oxygen content in water and the use of non-oxygen resistance pipelines. The air in the system is not eliminated, which also causes oxidation reaction and causes metal corrosion.

 

Different water quality - water quality varies from area to area, and water is corrosive in some places.

 

Electrochemical reactions between metals - the possibility of electrochemical corrosion between different metals in water.